We are able to support at least 500,000 square feet (50,000 square meters) per month.

Number of Layer(s) : 1 – 12
Max. board size : 18 inch X 24 inch
Material : FR-4, CEM1, CEM3
Special material : High Tg, Telfon, Halogen Free, Aluminum, etc.
Finish board thickness : 0.20 mm – 6.00 mm
Min. drill size : 0.30 mm
Min. Hole Diameter (finished) : 0.20 mm
Min. PTH wall thickness: 0.025 mm
Hole position deviation: + / - 0.05 mm
Min. line width / space:
4 mil / 4 mil
Min. spacing between hole edge to hole edge : For 0.30 -1.60 mm (Diameter) – 0.10 mm (4 mil)
For 1.61 - 6.50 mm (Diameter) – 0.15 mm (6 mil)
Outline Dimension :
+ / - 0.10 mm
Wrap & Twist : 0.70 %
Aspect ratio: 10:1
Surface finishing: Immersion Gold, Electro Gold Flash, Thick Gold Plating, Immersion Tin, HAL, HAL (Lead Free), OSP
Impedance control: Typical: 50 ohm +/- 10%
Insulation resistance: 10k ohm – 20M ohm (Typical: 5M ohm)
Continuity: <50 ohm (typical: 25 ohm)
Test voltage: 250 V (max)
Thermal stress: 260°C 20 Sec
Flammability: 94V0

Remarks: The above information is just for reference! If you have any question, please do not hesitate us!

 

Lead Time

Single Side & Double Side
4-8 Layers
10-12 Layers
Sample:
5-7 working days
10-12 working days
14-16 working days
Mass production:
15-18 working days
21-25 working days
25-28 working days
Repeat order:
10-15 working days
18-21 working days
25-28 working days

Remarks: All the lead time are not including the query time and delivery time.




Request a PCB quote now

All our manufacturing factories are complied with:

QS-9000 - Quality Assurance

QS9000 - Quality Assurance

The quality system at our manufacturing factories are registered to QS9000 and working hard to maintain the standards.

ISO - International Organization for Standardization

ISO

All our manufacturing factories and products are complied with:
• ISO9001:2000
• ISO9002
• ISO14001

IPC - Association Connecting Electronics Industries

IPC

All our manufacturing factories are members of IPC and we works hardly to comply with IPC's standards and industry programs.


UL - Standard for safety

UL - Standard for safety

All our products are listed to applicable UL Standards and requirements by Underwriters Laboratories Inc.



© 2004 Sky Systems Ltd.